Date:

May 19, 2022

Maintenance of adequate CPU temperatures is a key concern in any single-board computing device such as a Raspberry PI.

Date:

April 7, 2022

We are proud to announce that our ColdStream software is going next level. ColdStream 2.

Date:

March 24, 2022

Discover how generative design can help you find an innovative solution to heating

Date:

February 24, 2022

A deep dive into how different manufacturing constraints influence the optimized designs.

Date:

February 3, 2022

High-tech products drove the material specialist into developing materials with highly specific properties.

Date:

December 14, 2021

The lights on your Christmas tree might not require heatsinks, but most high-end lasers and LED lights do.

Date:

November 24, 2021

In the past decade innovation in automotive did not know its limit. Due to the increased interest in electric and hybrid mobility the need for high-performant batteries is becoming bigger and bigger.

Date:

October 28, 2021

Engines today are expected to meet high requirements, maximum performance and low fuel consumption while keeping pollutant emissions at a minimum. Inlet manifolds or Intake manifolds play a vital role.

Date:

October 14, 2021

Over the past decade, innovation brought engineering to a new level. In this webinar you will learn how to combine two stunning state-of-the-art technologies, Generative design and Additive manufacturing with each other.

Date:

August 27, 2021

During the summer, Diabatix will organize a series of webinars to get you up and running with new platform. In this last session Ir. Ine Vandebeek, Applications Engineer at Diabatix will guide through all possible boundary conditions in the Diabatix platform.

Date:

August 13, 2021

During the summer, Diabatix will organize a series of webinars to get you up and running with new platform. In this thirth session Ing. Reshmaa Selvakumar, Application Engineer at Diabatix will show you how to use the Diabatix platform to develop a high performant eMachine cooling jacket.

Date:

July 30, 2021

During the summer, Diabatix will organize a series of webinars to get you up and running with new platform. In this second session Ing. Gert-Jan Paulus, AI Design Engineer at Diabatix will show you how you can post process your simulations in the Diabatix platform.

Date:

July 22, 2021

In the past decade innovation in automotive did not know its limit. Due to the increased interest in electric and hybrid mobility the need for high-performant battery’s is becoming bigger and bigger.

Date:

July 16, 2021

During the summer, Diabatix will organize a series of webinars to get you up and running with new platform. In this first session Ing. Gert-Jan Paulus, AI Design Engineer at Diabatix will show you how you can use the Diabatix platform to create accurate CFD simulations.

Date:

June 24, 2021

Ing. Reshmaa Selvakumar, Application Engineer at Diabatix, will give you her insights on how generative design benefits electronic thermal management by demonstrating how to generate an air-cooled heat sink with the Diabatix platform.

Date:

May 20, 2021

Learn about the benefits of generative design for high-performance IGBT cooling.